RG-AP680(CD), Wi-Fi 6 Dual Radio 2.402 Gbps Outdoor High Power Wireless AP
Recommended for outdoor scenarios such as higher education, wireless city, energy sector, and commercial complexes, delivering good connectivity in the extreme-weather environments at longer distances.
Industrial-rated Design, Purposefully Built for Outdoor Harsh Environments
IP68 Rating
Surge Protection
Wide Operating Temperature Range
The highest protection against solid ingress and water ingress, resisting water, dust and sand.
Built-in high-grade surge protection component that can withstand 9KV surge voltage, ensuring stable operation in thunderstorms.
Withstand extreme variations in temperature from –40℃ to +65℃, ideal for outdoor environments in different regions.
1 Gbps Optical Port and 1 Gbps Electrical Port Deliver Maximum Networking Flexibility
1 Gbps Optical Port
It supports i-Share+ Solution, covering a range of over one kilometer for AP deployment.
1 Gbps Electrical Port
Network cable connection is supported, meeting existing networking requirements.
Ultra-Fast Speed and Capacity with Wi-Fi 6
2.402 Gbps
Hight Concurrency
OFDMA and MU-MIMO technologies are introduced for multi-STA stable connection.
Low Latency
OFDMA supports concurrent data transfer to multiple STAs at a latency as low as 20 ms.
High security
WPA3 is used to dramatically increase wireless security.
High Speed
1024QAM modulation delivers a 25% increase in data rate compared with IEEE 802.11ac.
Cloud, Making Your Business Easy
Remote monitoring
Remote Wi-Fi management
Cloud portal authentication
Wireless intelligent optimization
Spesifikasi
Hardware Specifications
Dimensions and Weight
RG-AP680(CD)
Unit dimensions(W x D x H)
251 mm x 168 mm x 64 mm (9.88 in. x 6.61 in. x 2.52 in.)
Shipping dimensions(W x D x H)
451 mm x 242 mm x 337 mm (17.76 in. x 9.53 in. x 13.27 in.)
Unit weight
Main unit: 1.17 kg (2.58 lbs)
Mounting bracket: 0.2 kg (0.44 lbs)
Shipment weight
5.84 kg (12.87 lbs)
Mounting
Wall/Pole-mount (a mounting bracket is delivered with the main unit)
Wi-Fi Radio
RG-AP680(CD)
Radio design
Dual-radio and up to four spatial streams:
● Radio 1: 2.4 GHz/5 GHz, two spatial streams, 2x2 MU-MIMO
● Radio 2: 5 GHz, two spatial streams, 2x2 MU-MIMO
Operating frequencies
Radio 1: 802.11b/g/n/ax
● 2.400 GHz to 2.4835 GHz, channels 1 to 13
Radio 2: 802.11a/n/ac/ax
● 5.150 GHz to 5.250 GHz, U-NII-1, channels 36, 40, 44, and 48
● 5.250 GHz to 5.350 GHz, U-NII-2A, channels 52, 56, 60, and 64
● 5.470 GHz to 5.725 GHz, U-NII-2C, channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, and 140
● 5.725 GHz to 5.850 GHz, U-NII-3/ISM, channels 149, 153, 157, 161, and 165
Note: Available frequency bands may vary with countries or regions. To use the above-mentioned frequency bands, ensure that they are supported in your country or region. For details, see WLAN Country or Region Codes and Channel Compliance.
Data rates
Combined peak date rate for 2.4 GHz and 5 GHz radios: 1.775 Gbps
Combined peak date rate for 5 GHz and 5 GHz radios: 2.402 Gbps
Radio 1:
2.4 GHz: 574 Mbps
● Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate to individual 2SS HE40 802.11ax client devices (maximum)
● Two spatial stream Single User (SU) MIMO for up to 287 Mbps wireless data rate to individual 2SS HE20 802.11ax client devices (typical)
5 GHz: 1.201 Gbps
● Two spatial stream Single User (SU) MIMO for up to 1.201 Gbps wireless data rate to individual 2SS HE80 802.11ax client devices (maximum)
● Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate to individual 2SS HE40 802.11ax client devices (typical)
● Two spatial stream Multi-User (MU) MIMO for up to 1.201 Gbps wireless data rate to up to two 1SS HE80 802.11ax DL-MU-MIMO capable client devices simultaneously (maximum)
● Two spatial stream Multi-User (MU) MIMO for up to 574 Mbps wireless data rate to up to two 1SS HE40 802.11ax DL-MU-MIMO capable client devices simultaneously (typical)
Radio 2: 5 GHz, 1.201 Gbps
● Two spatial stream Single User (SU) MIMO for up to 1.201 Gbps wireless data rate to individual 2SS HE80 802.11ax client devices (maximum)
● Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate to individual 2SS HE40 802.11ax client devices (typical)
● Two spatial stream Multi-User (MU) MIMO for up to 1.201 Gbps wireless data rate to up to two 1SS HE80 802.11ax DL-MU-MIMO capable client devices simultaneously (maximum)
● Two spatial stream Multi-User (MU) MIMO for up to 574 Mbps wireless data rate to up to two 1SS HE40 802.11ax DL-MU-MIMO capable client devices simultaneously (typical)
Data rate set
The following 802.11-compliant data rates in Mbps are supported:
The following table lists the radio frequency performance of Wi-Fi including different frequency bands, protocols, and date rates. It is country-specific, and Ruijie Networks reserves the right of interpretation.
Wi-Fi Radio Frequency Performance
RG-AP680(CD)
Frequency Band and Protocol
Data Rate
Maximum Transmit Power per Transmit Chain
Maximum Receive Sensitivity per Receive Chain
2.4 GHz 802.11b
1 Mbps
25 dBm
–92 dBm
2 Mbps
25 dBm
–82 dBm
5.5 Mbps
25 dBm
–84 dBm
11 Mbps
25 dBm
–78 dBm
2.4 GHz 802.11g
6 Mbps
25 dBm
–84 dBm
24 Mbps
23 dBm
–74 dBm
36 Mbps
23 dBm
–72 dBm
54 Mbps
20 dBm
–67 dBm
2.4 GHz 802.11n (HT20)
MCS0
25 dBm
–84 dBm
MCS7
20 dBm
–66 dBm
2.4 GHz 802.11n (HT40)
MCS0
25 dBm
–79 dBm
MCS7
20 dBm
–63 dBm
2.4 GHz 802.11ax (HE20)
MCS0
25 dBm
–84 dBm
MCS11
18 dBm
–54 dBm
2.4 GHz 802.11ax (HE40)
MCS0
25 dBm
–80 dBm
MCS11
18 dBm
–51 dBm
5 GHz 802.11a
6 Mbps
25 dBm
–84 dBm
24 Mbps
23 dBm
–74 dBm
36 Mbps
23 dBm
–72 dBm
54 Mbps
20 dBm
–67 dBm
5 GHz 802.11n (HT20)
MCS0
25 dBm
–84 dBm
MCS7
20 dBm
–66 dBm
5 GHz 802.11n (HT40)
MCS0
25 dBm
–81 dBm
MCS7
20 dBm
–63 dBm
5 GHz 802.11ac (VHT20)
MCS0
25 dBm
–84 dBm
MCS9
19 dBm
–61 dBm
5 GHz 802.11ac (VHT40)
MCS0
25 dBm
–81 dBm
MCS9
19 dBm
–56 dBm
5 GHz 802.11ac (VHT80)
MCS0
25 dBm
–78 dBm
MCS9
19 dBm
–53 dBm
5 GHz 802.11ax (HE20)
MCS0
25 dBm
–84 dBm
MCS11
18 dBm
–54 dBm
5 GHz 802.11ax (HE40)
MCS0
25 dBm
–81 dBm
MCS11
18 dBm
–51 dBm
5 GHz 802.11ax (HE80)
MCS0
25 dBm
–78 dBm
MCS11
18 dBm
–48 dBm
Bluetooth Radio
RG-AP680(CD)
Bluetooth
Bluetooth 5.0
Antenna type
Integrated omnidirectional antenna
Maximum antenna gain
4.5 dBi
Maximum transmit power
10 dBm
Receive sensitivity
-88 dBm (@BLE)
Ports Specifications
RG-AP680(CD)
Fixed service port
1 x 10/100/1000BASE-T port, supporting PoE input
1 x 1GE SFP port
Fixed management port
1 x RJ45 console port (serial console port)
Status LED
1 x multi-color system status LED
3 x single-color RSSI LEDs
Button
1 x Reset button
● Press the button for shorter than 2 seconds. Then the device restarts.
● Press the button for longer than 3 seconds. Then the device restores to factory settings.
Power Supply and Consumption
RG-AP680(CD)
Input power supply
The AP supports the following two power supply modes:
● 48 V DC/0.35 A power input over DC connector: The DC connector accepts 2.0 mm/6.3 mm center-positive circular plug. A DC power adapter needs to be purchased independently.
● PoE input over ETH/PoE: The power source equipment (PSE) complies with IEEE 802.3af/at standard (PoE/PoE+).
Note:
If both DC power and PoE are available, DC power is preferred.
Overall power consumption
Maximum power consumption: 12.95 W
● DC powered: 12.95 W
● PoE powered (802.3af): 12.95 W
● PoE+ powered (802.3at): 12.95 W
● PoE++ powered (802.3bt): 12.95 W
● Idle mode: 6.0 W
Environment and Reliability
RG-AP680(CD)
Temperature
Operating temperature: –40°C to +65°C (–40°F to +149°F)
Storage temperature: –40°C to +85°C (–40°F to +185°F)
Note: At an altitude in the range of 3,000–5,000 m (9,842.52–16,404.20 ft.), every time the altitude increases by 220 m (722 ft.), the maximum temperature decreases by 1°C (1.8°F).
Humidity
Operating humidity: 0% RH to 100% RH (non-condensing)
Storage humidity: 0% RH to 100% RH (non-condensing)
IP rating
IP68
Mean Time Between Failure (MTBF)
> 250,000 hours
Regulatory Compliance
RG-AP680(CD)
Security regulations
IEC 62368-1
EN 62368-1
EN 60950-22
EMC regulations
EN 55032
EN 55035
EN IEC 61000-3-2
EN 61000-3-3
EN 301 489-1
EN 301489-3
EN 301489-17
Radio frequency regulations
EN 300 328
EN 301 893
EN 300 440
EN 62311
EN IEC 62311
EN 50665
FCC Part 15
*For more country-specific regulatory information and approvals, contact your local sales agency.
Software Specifications
Applicable Software Version
RG-AP680(CD)
Applicable software version
RGOS11.9(6)W1B1 or later
WLAN
RG-AP680(CD)
Recommended maximum number of active devices per AP
120
Maximum number of associated clients
1024
Note
The number of associated clients varies according to the environment.
Maximum number of BSSIDs
32 (up to 16 BSSIDs per radio)
STA management
SSID hiding
Each SSID can be configured with the authentication mode, encryption mechanism, and VLAN attributes independently.
Remote intelligent perception technology (RIPT)
Intelligent client identification technology
Intelligent load balancing based on the STA quantity or traffic
STA limiting
SSID-based STA limiting
Radio-based STA limiting
Bandwidth limiting
STA/SSID/AP-based rate limiting
Wireless roaming
Layer 2 and Layer 3 roaming
Security
RG-AP680(CD)
Authentication and encryption
Remote Authentication Dial-In User Service (RADIUS)
PSK, web, 802.1X, WPA, WPA2, and WPA3 authentication
SMS authentication (used with the RG-WS series wireless access controller)
MAB authentication (used with the RG-WS series wireless access controller)
Tips: Product information and performance will be affected by upgrade iteration, specific environment and other factors, so FAQ content is for reference only. For further information, please contact
online support.
How would you rate your experience on this page?
Very disatisfying
Very satisfying
If you would like to offer more comment, please type in the textbox below, that would be helpful for the improvement of this page.
Submit
Thank you for your feedback!
Ruijie Networks websites use cookies to deliver and improve the website experience.
See our cookie policy for further details on how we use cookies and how to change
your cookie settings.
When you visit any website, the website will store or retrieve the information on your
browser. This process is mostly in the form of cookies. Such information may involve your
personal information, preferences or equipment, and is mainly used to enable the website to
provide services in accordance with your expectations. Such information usually does not
directly identify your personal information, but it can provide you with a more personalized
network experience. We fully respect your privacy, so you can choose not to allow certain
types of cookies. You only need to click on the names of different cookie categories to
learn more and change the default settings. However, blocking certain types of cookies may
affect your website experience and the services we can provide you.
Performance cookies
Through this type of cookie, we can count website visits and traffic sources in
order to evaluate and improve the performance of our website. This type of
cookie can also help us understand the popularity of the page and the activity
of visitors on the site. All information collected by such cookies will be
aggregated to ensure the anonymity of the information. If you do not allow such
cookies, we will have no way of knowing when you visited our website, and we
will not be able to monitor website performance.
Essential cookies
This type of cookie is necessary for the normal operation of the website and
cannot be turned off in our system. Usually, they are only set for the actions
you do, which are equivalent to service requests, such as setting your privacy
preferences, logging in, or filling out forms. You can set your browser to block
or remind you of such cookies, but certain functions of the website will not be
available. Such cookies do not store any personally identifiable information.