Picture

RG-MAP852-SF-S, Optical i-Share+ Solution Basic Micro AP, Wi-Fi 6 Dual-Radio 1.775 Gbps

Recommended for deployment in schools, hotels, medical care, office, production workshops, etc.

Models

RG-AM5528-SF

Master AP, 24 x 2.5G optical ports, 24 x power ports

RG-MAP852-SF-M

Micro AP, 2.976 Gbps, 4 x downlink electrical ports

RG-MAP852-SF-S

Micro AP,1.775 Gbps, 1 x downlink electrical port

RG-AM5532

Master AP, 24 × Gigabit PoE downlink ports

RG-MAP852(V3)

Micro AP, Wi-Fi 6, 2.976 Gbps, four downlink ports

Series

Optical i-Share+ Solution i-Share+ Solution

Datasheet Sales Enquiry

Highlight Features

1G optical port and gigabit electrical ports, integrated wired and wireless coverage
Data transmission and power supply through a hybrid cable
Upgrade to Wi-Fi 6, wireless transmission at a rate of up to 1.775 Gbps
Unified cloud management, intelligent optimization, and easy O&M

Key Specification
Fitur
Comparison
Spesifikasi
Resources
Informasi Pemesanan
FAQ

Sales Enquiry

Key Specification View More

Fitur

Ruijie All-Optical i-Share+ Solution - Micro AP (RG-MAP852-SF-S)

Specifications

Solution

RG-MAP852-SF-S works with the optical i-Share master AP to realize high-bandwidth data transmission and long-distance PoE power supply through a hybrid cable, integrating wired and wireless coverage.

Wi-Fi 6

Maximum Data Rate: 1.775 Gbps

Maximum STAs: 256

i-Share Mode

P2P Power Supply Through a Hybrid Cable

New Wi-Fi 6 Experience with a Speed of 1776 Mbps

1776

Hight Concurrency

Multi-user transmission technologies such as OFDMA and MU-MIMO are introduced, supporting 64 concurrent users.

Low Latency

OFDMA technology is used to transmit data to multiple terminals simultaneously. The latency is as low as 20 ms.

Security

The next-generation wireless encryption protocol WPA3 greatly improves the security of wireless connections.

High Speed

With 1024QAM modulation, data rate is 25% higher compared with 802.11ac.

Unified Cloud Management
Intelligent Optimization, and Easy O&M

The WIS cloud network configuration and optimization can be completed without onsite operations.You can use Wi-Fi Moho for easier O&M.
With early warning of network failures, wireless networks can be monitored anytime and anywhere

Go to WIS cloud network >

Cloud O&M

24/7 Network Optimization

Real-time Warnings

Fault Location

Comparison

Protocol

Data rate

MIMO

Fixed port

Recommended STAs

Maximum STAs

Bluetooth

Power Consumption

Dimensions (W x D x H)

Installation Method

Launch time

Warranty

Spesifikasi

Hardware Specifications

Dimensions and Weight	RG-MAP852-SF-S
Unit dimensions(W x H x D)	86 mm x 160 mm x 30 mm (3.39 in. x 6.30 in. x 1.18 in.)
Shipping dimensions(W x D x H)	383mm x 355mm x 273mm ( 15.08 in. x 13.98 in. x10.75 in.)
Unit weight	Main unit: 0.30 kg (0.66 lbs.) Mounting bracket: 0.05 kg (0.11 lbs.)
Shipping weight	10.99 kg (24.23 lbs)
Mounting	Ceiling/Wall/In-wall-mount
Color	White
Lock option	Kensington lock

Radio Specifications	RG-MAP852-SF-S
Radio design	Dual-radio: Up to a total of four spatial streams Radio 1: 2.4 GHz, 2 spatial streams: 2x2, MU-MIMO Radio 2: 5 GHz, 2 spatial streams: 2x2, MU-MIMO
Operating frequencies	Radio 1, 802.11b/g/n/ax: ● 2.400 GHz to 2.4835 GHz, channels 1 to 13 Radio 2, 802.11a/n/ac/ax: ● 5.150 GHz to 5.250 GHz, U-NII-1, channels 36, 40, 44, and 48 ● 5.250 GHz to 5.350 GHz, U-NII-2A, channels 52, 56, 60, and 64 ● 5.470 GHz to 5.725 GHz, U-NII-2C, channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, and 140 ● 5.725 GHz to 5.850 GHz, U-NII-3/ISM, channels 149, 153, 157, 161, and 165 Note: Country-specific restrictions apply.
Date rates	Combined peak data rate: 1.775 Gbps Radio 1: 2.4 GHz, 574 Mbps ● Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate to individual 2SS HE40 802.11ax client devices (max.) ● Two spatial stream Single User (SU) MIMO for up to 287 Mbps wireless data rate to individual 2SS HE20 802.11ax client devices (typical) Radio 2: 5 GHz, 1.201 Gbps ● Two spatial stream Single User (SU) MIMO for up to 1.201 Gbps wireless data rate to individual 2SS HE80 802.11ax client devices (typical) ● Two spatial stream Multi-User (MU) MIMO for up to 1.201 Gbps wireless data rate to two 1SS or 2SS HE80 802.11ax DL-MU-MIMO client devices (max.)
Data rate set	The following 802.11-compliant data rates in Mbps are supported: 2.4 GHz radio ● 802.11b: 1, 2, 5.5, 11 ● 802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 ● 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40) ● 802.11ax: 8.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40) 5 GHz radio ● 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 ● 802.11n: 6.5 to 600 (MCS0 to MCS15, HT20 to HT40) ● 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2, VHT20 to VHT80) ● 802.11ax: 8.6 to 1,201 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE80)
Packet aggregation	802.11n/ac/ax: A-MPDU and A-MSDU
Antenna type	Built-in omnidirectional antenna ● 2 x 2.4 GHz antennas ● 2 x 5 GHz antennas
Max. antenna gain	4.72 dBi in 2.4 GHz and 6.12 dBi in 5 GHz With reference to the pattern of each antenna of the MIMO radios, the maximum gain of the effective per-antenna pattern is 3 dBi in 2.4 GHz and 3 dBi in 5 GHz.
Max. transmit power	2.4 GHz radio: 21 dBm (18 dBm per chain) 5 GHz radio: 21 dBm (18 dBm per chain) Note: The transmit power is limited by local regulatory requirements.
Power increment	Configurable in increments of 1 dBm or in percentage (recommended)
Radio technologies	802.11b: Direct-Sequence Spread-Spectrum (DSSS) 802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM) 802.11ax: Orthogonal Frequency Division Multiple Access (OFDMA)
Modulation types	802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, and 64-QAM 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, and 256-QAM 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM

The following table lists the radio frequency performance of Wi-Fi including different frequency bands, protocols, and date rates. It is country-specific, and Ruijie Networks reserves the right of interpretation.

Wi-Fi Radio Frequency Performance	RG-MAP852-SF-S
Frequency Band and Protocol	Data Rate	Max. Transmit Power per Transmit Chain	Max. Receive Sensitivity per Receive Chain
2.4GHz 802.11b	1 Mbps	18 dBm	–91 dBm
	2 Mbps	17 dBm	–91 dBm
	5.5 Mbps	16 dBm	–90 dBm
	11 Mbps	15 dBm	–87 dBm
2.4GHz 802.11g	6 Mbps	18 dBm	–89 dBm
	24 Mbps	16 dBm	–82 dBm
	36 Mbps	16 dBm	–78 dBm
	54 Mbps	15 dBm	–72 dBm
2.4GHz 802.11n (HT20)	MCS0	18 dBm	–85 dBm
2.4GHz 802.11n (HT20)	MCS7	15 dBm	–67 dBm
2.4GHz 802.11n (HT40)	MCS0	18 dBm	–82 dBm
2.4GHz 802.11n (HT40)	MCS7	15 dBm	–64 dBm
2.4GHz 802.11ax (HE20)	MCS0	18 dBm	–85 dBm
2.4GHz 802.11ax (HE20)	MCS11	12 dBm	–58 dBm
2.4GHz 802.11ax (HE40)	MCS0	18 dBm	–82 dBm
2.4GHz 802.11ax (HE40)	MCS11	12 dBm	–54 dBm
5GHz 802.11a	6 Mbps	18 dBm	–89 dBm
	24 Mbps	16 dBm	–82 dBm
	36 Mbps	16 dBm	–78 dBm
	54 Mbps	15 dBm	–72 dBm
5GHz 802.11n (HT20)	MCS0	18 dBm	–85 dBm
5GHz 802.11n (HT20)	MCS7	15 dBm	–67 dBm
5GHz 802.11n (HT40)	MCS0	18 dBm	–82 dBm
5GHz 802.11n (HT40)	MCS7	15 dBm	–64 dBm
5GHz 802.11ac (VHT20)	MCS0	18 dBm	–85 dBm
5GHz 802.11ac (VHT20)	MCS9	15 dBm	–60 dBm
5GHz 802.11ac (VHT40)	MCS0	18 dBm	–82 dBm
5GHz 802.11ac (VHT40)	MCS9	15 dBm	–57 dBm
5GHz 802.11ac (VHT80)	MCS0	18 dBm	–79 dBm
5GHz 802.11ac (VHT80)	MCS9	15 dBm	–53 dBm
5GHz 802.11ax (HE20)	MCS0	18 dBm	–85 dBm
5GHz 802.11ax (HE20)	MCS11	12 dBm	–58 dBm
5GHz 802.11ax (HE40)	MCS0	18 dBm	–82 dBm
5GHz 802.11ax (HE40)	MCS11	12 dBm	–54 dBm
5GHz 802.11ax (HE80)	MCS0	18 dBm	–79 dBm
5GHz 802.11ax (HE80)	MCS11	12 dBm	–52 dBm

Port Specifications	RG-MAP852-SF-S
Fixed service port	Uplink: 1 x 1000Base-X LC port Downlink: 1 x 10/100/1000Base-T adaptive Ethernet electrical port
Fixed management port	1 x Micro USB console port
Status LED	1 x system indicator
Button	1 x Reset button ● Press the button for shorter than 2 seconds. Then the device restarts. ● Press the button for longer than 5 seconds. Then the device restores to factory settings.

Power Supply and Consumption

RG-MAP852-SF-S

Power supply

(1) 48 V DC/0.5 A power input

(2) IEEE 802.3af-compliant PoE power input using hybrid cables

Max. power consumption

< 11 W

Environment and Reliability	RG-MAP852-SF-S
Temperature	Operating temperature: –10°C to +40°C (14°F to 104°F) Storage temperature: –40°C to +70°C (–40°F to +158°F) Note: At an altitude between 3,000 m (9,843 ft.) and 5,000 m (16,404 ft.), every time the altitude increases by 167 m (547 ft.), the maximum temperature decreases by 1°C (1.8°F).
Humidity	Operating humidity: 5% RH to 95% RH (non-condensing) Storage humidity: 5% RH to 95% RH (non-condensing)
Environment standard	Storage and operating environment: NEBS GR-63-CORE_Issue3_2006 GB/T 2423.6-1995
Mean Time Between Failure (MTBF)	200,000 hours (22 years) at the operating temperature of 25°C (77°F)

Software Specifications

Software	RG-MAP852-SF-S
Applicable software version	RGOS11.9(6)W1B4 or later
WLAN
Max. number of associated STAs	256 (up to 128 STAs per radio)
Max. number of BSSIDs	32 (up to 16 BSSIDs per radio)
WLAN service	Maximum number of WLAN IDs: 16 Maximum number of users per WLAN: 256
STA management	SSID hiding Band steering Intelligent load balancing based on client count, traffic, or radio frequency Enabling or disabling the radio as scheduled Intelligent STA identification technology Rate set settings Remote Intelligent Perception Technology (RIPT) Parameter adjustment for enhanced user experience: client RSSI threshold, client idle timeout, client average rate threshold, transmit power of beacon frames and probe responses
STA limiting	SSID-based STA limiting Radio-based STA limiting
Bandwidth limiting	WLAN QoS rate limiting, fair scheduling, and Wi-Fi Multimedia (WMM)
CAPWAP	IPv4/IPv6 CAPWAP Layer 2 and Layer 3 topology between an AP and an AC An AP can automatically discover the accessible AC. An AP can be automatically upgraded through the AC. An AP can automatically download the configuration file from the AC. CAPWAP through NAT
Data forwarding	Centralized and local forwarding
Wireless roaming	Layer 2 and Layer 3 roaming
Wireless locating	MU device locating
Security and Authentication
Authentication and encryption	Remote Authentication Dial-In User Service (RADIUS) PSK and web authentication QR code-based guest authentication, SMS authentication, and MAC address bypass (MAB) authentication Data encryption: WEP (64/128 bits), WPA (TKIP), WPA-PSK, WPA2 (AES), WPA3-Enterprise, WPA3-Personal
Data frame filtering	Allowlist, static blocklist, and dynamic blocklist
WIDS	Wireless Intrusion Detection System(WIDS) User isolation Rogue AP detection and containment
ACL	IP standard ACL, MAC extended ACL, IP extended ACL, and expert-level ACL Time range-based ACL ACL based on a Layer 2 interface ACL based on a Layer 3 interface Ingress ACL based on a wireless interface Dynamic ACL assignment based on 802.1X authentication (used with the AC)
CPP	CPU Protect Policy (CPP)
NFPP	Network Foundation Protection Policy (NFPP) ARP attack prevention ICMP attack prevention DHCP attack prevention
Routing and Switching
MAC	Static and filtered MAC addresses MAC address table size: 2,048 Max. number of static MAC addresses: 2,048 Max. number of filtered MAC addresses: 2,048
Ethernet	Jumbo frame length: 1,518 bytes Full-duplex and half-duplex modes of interfaces IEEE802.1p and IEEE802.1Q Optical module information display, alarms about faults, and diagnosis parameter measurement (QSFP+/SFP+/SFP)
VLAN	Interface-based VLAN assignment Max. number of SVIs: 200 Max. number of VLANs: 4,094 VLAN ID range: 1 to 4,094
ARP	ARP entry aging, gratuitous ARP learning, and proxy ARP Max. number of ARP entries: 1,024 ARP check
IPv4 services	IPv4 Ping and IPv4 Traceroute DNS client DHCP Server, DHCP client, and DHCP Relay DHCPv4 Snooping IPv4 Source Guard
IPv6 services	Static and dynamic IPv6 addresses Neighbor Discovery (ND) IPv6 ping and IPv6 Traceroute IPv6 transparent transmission ICMPv6 IPv6 DHCP client
IP routing	IPv4/IPv6 static routing Max. number of static IPv4 routes: 1,024 Max. number of static IPv6 routes: 1,000 Static black hole routing
Multicast	Multicast-to-unicast conversion
VPN	PPPoE client IPsec VPN
Network Management and Monitoring
Network management	NTP server and NTP client SNTP client SNMPv1/v2c/v3 Fault detection and alarm Information statistics and logging
Network management platform	Web management (Eweb)
User access management	Telnet and TFTP client
Switchover among Fat, Fit, and cloud modes	When the AP works in Fit mode, it can be switched to Fat mode through an AC. When the AP works in Fat mode, it can be switched to Fit mode through the console port or Telnet mode. When the AP works in cloud mode, it can be managed through Ruijie Cloud.

Regulatory Compliance

Regulatory Compliance	RG-MAP852-SF-S
Regulatory compliance	EN 55032, EN 55035, EN 61000-3-3, EN IEC 61000-3-2, EN 301 489-1, EN 301 489-3, EN 301 489-17, EN 300 328, EN 301 893, EN 300 440, FCC Part 15, EN IEC 62311, IEC 62368-1, and EN 62368-1

* For more country-specific regulatory information and approvals, contact your local sales agency.

Resources All Resources

Learn about Products or Solutions

Product Datasheet

Software and Configuration

Informasi Pemesanan

Model	Description
RG-AM5528-SF	Optical i-Share+ master AP for Ruijie O-Share Solution 24 x downlink 1G/2.5G SFP ports and 24 x PoE/PoE+ power supply ports. Four power supply ports support PoE/PoE+/PoE++ power supply. 4 x uplink 10G SFP+ ports, low noise, and power supply included In i-Share mode, each master AP occupies eight wireless controller licenses.
RG-MAP852-SF-S	Wi-Fi 6 dual-radio wall plate micro AP for Ruijie O-Share Solution 1 × SFP port 1 ×10/100/1000Base-T Ethernet port with auto-negotiation 2.4 GHz and 5 GHz frequency bands A wireless data rate of up to 1.775 Gbps per device BOB structure One 1G optical module of the master AP
RG-MAP852-SF-M	Wi-Fi 6 dual-radio wall plate micro AP for Ruijie O-Share Solution 1 × 2.5G SFP port 4 ×10/100/1000Base-T Ethernet ports with auto-negotiation 2.4 GHz and 5 GHz frequency bands A wireless data rate of up to 2.976 Gbps per device Support for Bluetooth Wall-mounted, ceiling-mounted, and junction box-mounted installation One 2.5G optical module for the micro AP and one 2.5G optical module for the master AP are delivered with this AP.
RG-HybridP	The hybrid pigtails for Ruijie O-Share Solution incorporates optical fibers and copper wires. One end is the LC interface and DC connector.
RG-HybridBox	The hybrid box for Ruijie O-Share Solution supports for the input of 24 hybrid pigtails and the output of 24 hybrid cables, connecting the hybrid pigtails to the hybrid cables.
RG-OEHC-SM-1B6A2-2x0.5-I-305	Indoor single-core 2 x 0.5 mm² hybrid cable, single roll, with a length of 305 m
RG-OEHC-SM-1B6A2-2x1.0-I-305	Indoor single-core 2 x 1.0 mm² hybrid cable, single roll, with a length of 305 m

FAQ Ask a Question

Tips: Product information and performance will be affected by upgrade iteration, specific environment and other factors, so FAQ content is for reference only. For further information, please contact online support.